How to Programming a Subaru Key Fob at Home

Depending on how brand new your Subaru is, you may require having the key fob programmed by a dealer or an automotive locksmith. This is done through the connection of a computer programming machine to your vehicle.

To program your Subaru begin by unlocking the driver's doors using the door button control then close it. You will hear a chime on the instrument panel, and the dome lights will flash.

Step 1: Locate the Transmitter Circuit Board

There are many ways to program your keyfob. The first step is to be aware of the type of key fob you have. This can be done by examining the shape of the key fob, or by listening to the buzz in your car.

Once you have the necessary information, you can start the process of programming your key fob at home. To do this, you will require a key made of steel and a screwdriver that has a flathead. Open the key fob by twisting it. Push the metal key into the case and let go of the battery by pressing the tabs that hold it in place. Replace the battery and put the case back together.

Step 2: Unscrew the Key Fob Case

Change the battery is a smart idea as it can bring back key fobs that have stopped working anymore. In some cases, the buttons on the key fob may be damaged. If you notice that the contacts made of metal on the button have come loose, try soldering them in place again in order to make them function once more.

Before you begin the process, ensure the doors of your vehicle are closed and that your ignition is turned off. Close the door on the driver's side and then press the button 10 times in rapid succession. After that, you'll hear the instrument panel chime, and your dome lights will flash. This indicates that you are ready to move on.

Step 3. Insert the fob of the key into the ignition

There are lots of articles online that will give instructions on how to program a replacement or new subaru smart key key fob at home, but they are not precise. Reprogramming an electronic key is best done by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat with all doors closed and the engine turned off. Use the door button to open all doors. Close and open the door to the driver's side two more times. Inject and remove the ignition key (don't rotate it) 10 times over 40 seconds. The system will chirp to confirm that the settings have been modified.

Step 4 Step 4: Turn on the ignition

It is essential to realize that this method of programming a key fob only is effective if you have a functioning key. If not, a dealership or auto-locksmith will need to program the key for your subaru key copy Fort Bliss.

Once your key is programmed, you should be able start your car within five seconds. To begin, make sure all doors are shut and the engine is off. Then, sit in the driver's seat and open all doors with the door button control. Place the key in the ignition and turn it to the first position. The electrical systems will be activated, but the engine will remain in neutral. Repeat this procedure ten times.

Step 5: Unlock the Driver's Door

Subaru provides a variety of premium automobiles equipped with key fobs that lock and unlock doors, start the engine, and even defrost windows. However, sometimes these gadgets fail to function properly.

To resolve the issue then you should contact a locksmith or the dealer. This will resolve the issue and ensure your vehicle is secure.

First, open and close the driver's side door. Place the key in ignition and turn it until it is in position 1. Then, reverse it to the off position. Repeat this 10 times in one row as fast as you can. After ten times you should hear a chime.

Step 6: Press the Lock/Unlock Button on the Driver's Door

The process to replace the battery inside the Subaru remote key fob is simple. Open the exterior fob case. Then you can use an flathead screwdriver, to pry open the internal case and take out the old battery.

After removing the battery to replace it, you can replace it with the new one. Close the case. Next, sit in the driver's seat, and unlock all doors using the door button control. Finally, insert the key in the ignition and turn it to ensure that the electrical systems are on, but the engine is off. Repeat this 10 times until you hear a chime on the instrument panel. This will put the system into programming mode.

Step 7: Press the Lock/Unlock Button on the Passenger's Door

For some owners, the annoyance chirp heard when locking and unlocking a Subaru key fob from outside the vehicle could become distracting. In some cases you can deactivate the chirp by opening and shutting all doors while double-clicking lock button on the key fob.

Close all doors, including the fuel-filler lid, and turn off the ignition. For 10 seconds, press and hold the lock button on the key fob. The instrument panel emits a sound when this is achieved. The chime signifies that the fuel-filler lid and door lid are locked keys in subaru forester. It is possible to alter the setting so that the doors are locked automatically without pressing a switch.

Step 8: Enter the 8-Digit Transmitter Number.

Note down the initial series of 8-digits and keep it in your wallet. Now, climb into the driver's seat, close the doors and turn the key to the first position. After ten turns, your instrument panel will chime once.

Then, open the case for the key fob and find the transmitter circuit board inside. The circuit board should contain one or two numbers with 8 digits. Follow the instructions in the guide to register the code. For older models, this procedure may require a visit to the dealer.