Protect Your Pride And Joy With The Ghost Immobiliser

Ghost 2 immobiliser Immobiliser will protect your valuable possession from theft. It's discreet and does not require additional key fobs to operate.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique changeable pin code sequence that can be up to 20 presses long. This will then allow your vehicle to start.

Simple PIN code change process

With the increasing rate of vehicle theft, a lot of owners are seeking to improve their security. There are many kinds of security products that are available for sale that range from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your car. A tracking device can assist you in locating your vehicle if it's stolen, but it will not prevent the crime. Immobilisers, on the contrary does exactly what it says on the label: it shuts off the engine cost of ghost immobiliser your car to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to steal your vehicle.

The ghost device utilizes the buttons on your car to create an unique sequence that needs to be entered in order for the engine to begin. This can be accomplished using the indicator stalk, window or heater buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without having to use the button sequence. This is especially beneficial if you have to surrender your car to a valet service or parking, as the immobiliser will remain activated and not disabled.

The Ghost is a truly unique and innovative device which works in conjunction with buttons of your car instead of being a separate unit. It's not just an effective deterrent to theft of your vehicle and vandalism, but it can be used on future vehicles you own. This makes it a far better investment than a traditional wheel lock.

Weatherproof small device

The Autowatch Ghost Immobiliser is an advanced security device that shields your vehicle from key hacking and cloning. It also prevents ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU over the CAN data bus, which disables the engine. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to ensure that it works with all vehicles. It is also indestructible to jamming devices which is a common technique used by thieves to bypass existing immobilisers.

The benefit of CAN data over traditional systems is that they operate silently. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is likewise unreadable by traditional diagnostic tools. The Autowatch ghost doesn't emit LED indications and uses the buttons in your vehicle, such as the steering wheel, centre console or door panels to create a unique, programmable disarm sequence. This sequence can be extended by 20 or more presses to provide additional security. The iPhone app permits one, authorized connection with a pairing code that is unique to the Ghost and communication between the two is encrypted.

The Ghost will stop car thieves from putting in a new ignition key or replacing the ECU to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It can be temporarily operated in Valet/Service mode (with the appropriate parameters, like a 30mph speed limit) and, therefore, you can offer your vehicle to valet or service without entering the code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts electronic signals that block your car's system from going through its normal start-up routine until you input the passcode you have created. The system can be activated and deactivated by using your smartphone's app without the need for additional wires.

The standard factory immobilisers work by using a transponder that is built into the key. This transmits a signal to the ECU. If the correct code is sent the car will start however if the transponder is replaced with one from another vehicle the immobiliser won't recognize it. This enables the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology has developed the porsche 911 ghost Installer immobiliser. It protects your vehicle from hacking, key cloning and even key theft. Only by physically towing your car away could a thief take it away, and they would still not be able to drive the vehicle.

ghost installers near me uses the buttons in your vehicle including the indicator stalk as well as the steering wheel and door panels to generate a unique, changeable PIN code sequence that needs to be entered before you can use your car. This is done without the need for additional hardware, such as a key-fob and can be as long as 20 presses long. It is also undetectable to diagnostics equipment and doesn't transmit radio frequency signals so thieves are unable to utilize sophisticated RF scanning or code grabbing techniques to discover that security systems have been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is covertly integrated into the vehicle to ensure that it can't be disabled or removed by thieves. It's also harder to remove than a car alarm, which requires disarming via a button sequence. This makes it a great complement to an GPS tracking device that can be used to track your vehicle after it's stolen.

Override of emergency PIN code

You don't have to look very far on social media for stories or videos of cars that have been stolen with the most advanced technology tools. This includes key-cloning devices as well as hacking tools that allow them to start the car without the original keys.

The Ghost immobiliser helps combat this and gives you an additional layer of security to stop your vehicle from being taken if it is targeted by thieves. It creates a unique pin code when pushing the buttons on your steering wheel, door panel and centre console. This unique PIN has to be entered in conjunction with your original key fob to stop the vehicle from beginning. The unique override pin is on the black card you will receive following installation. It's easy to remember because there are no LED indications.

The device is hidden within the vehicle's wiring and does not emit radio signals, which means it cannot be identified by modern criminals using diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Unlike most other security systems that have an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependant). This allows them to disable the vehicle completely with an electronic block of commands to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems, but this has to be specified prior to installing the device. They are also fully service/valet mode compatible and a great alternative to a tracker having your car in for repairs to an electrical issue at the dealers.

Service/Valet mode

In recent years there has been a increase in vehicles being stolen with no owner's keys. It's easier than ever before to take your joy and pride with the availability of key cloning tools & door lock picks. To stop this, we are now offering the Autowatch ghost immobilise immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your vehicle has been hijacked.

It directly communicates with your car's ECU (Engine Control Unit), via the data loop of CAN. It's completely quiet since it doesn't use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also protects the user from using an ECU or key to bypass the system, because only the PIN number allows the engine to be started.

The device is hidden within your vehicle and is reached via the buttons on your steering wheel, center console and door panels. A unique and changeable PIN code sequence up to 20 digits has to be entered before you can start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car being driven away or started in the event that a PIN code hasn't been entered before. If the device is armed and you attempt to drive off it will display an indication on your dash, which will flash on a regular basis for approximately 300m. If you type in your PIN code during this time, it will disable the anti-hijack system and your vehicle will continue to drive just as normal. If you don't enter your PIN at this time, the indicator will continue to flash and require a new pin code every time you attempt to start your car.