Sliding Patio Doors Repairs

Your sliding glass patio doors to let in more light and increase your home's energy efficiency. As time passes, they could begin to show signs that need some attention.

Most sliding patio door repair company door problems are relatively easy to fix. Learn more about how to keep your patio doors looking and operating like new:.

Dirty or damaged tracks

The tracks of your sliding patio door may be filthy or clogged. Over time, the grit and grime from daily use build up on the track and can cause the door to jam or even fall apart completely.

Including regular light cleaning of sliding doors and their tracks in your chores at home can help minimize this build-up. Begin by cleaning any large debris off the tracks and then wipe them clean using warm water and a non-abrasive cleaning product, such as dish soap. Vinegar can be added to your cleaning solution to help remove stubborn dirt and grease stains.

If your sliding door is not working smoothly after you've followed these steps, this could be a sign there is more damage. This could require a professional to fix or replace the door. There are a few basic fixes you can do before calling a professional to avoid expensive repairs or replacements.

It is essential to put a doormat on the bottom of your sliding doors to help trap dirt before it can reach the tracks. You should also regularly cut back any bushes or plants close to your sliding doors in order to limit the amount of debris trapped in the tracks. Close the door correctly to ensure that you don't damage the rollers or wheels. You can prolong the life of your doors by maintaining them clean and lubricated.

Rollers that are misaligned

Sometimes, a patio could be misaligned. This is usually due to dirt, or other obstructions which can be easily removed. However, it could also be due to a bent track or roller. In this situation you can re-align the rollers by taking them off with the adjustment screws and then cleaning with ruby alcohol. These parts can be fragile.

If your doors remain stuck and stick, you can try lubricating the rollers to reduce friction and allow them to slide. It is recommended to use a silicone-based lubricant, since petroleum-based ones tend to attract dirt faster. It is also important to clean the tracks and rollers prior Misted to applying lubricant.

After cleaning the rollers, you can reinstall using their adjustment screws. Use the same lubricant you used to clean them. Make sure to push the rollers completely in their channels when reinstalling them. You can test your door now and see if it glides smoothly.

If the problem continues, it is possible to remove the door and check the rollers and tracks. If the tracks or wheels are bent badly it could be necessary to replace them. It is best to engage a professional to install the rollers or tracks in this situation.

Warped Glass

Sliding glass door are great to bring the outdoors into your home and letting natural light in however, they can also be prone to damage that requires repair or replacement. Some of the most frequent problems that arise are warping, cracking and fading. The materials that make up the sliding glass patio doors begin to break down when exposed heat, sunlight and other environmental elements. Cracks are usually caused by impact damage such as a lawnmower or ball smacking into the door. Fading is usually due to repeated exposure to sunlight and other elements.

If you have sliding glass patio doors that are difficult to open and close, this could indicate that the rollers and tracks are not functioning properly. This issue could be caused by the accumulation of dirt or rust on the track or wheels or a lack or lubrication. Cleaning the tracks and rollers by removing obstructions, and then applying silicone spray can help solve this issue.

The locking mechanism may also be defective, making it difficult to open and shut your sliding patio doors. This could be caused by misalignment or wear and tear, but a simple fix is to adjust the locking mechanism by turning the adjustment screws that are located at the bottom of the track.

Drafts or air leaks that occur around your sliding double glazed patio door repairs doors are a common problem that can drastically decrease their energy efficiency. These problems are usually caused by worn-out weather stripping or poor door alignment. This can be easily fixed by replacing the weather stripping, and re-aligning your doors.

Loose Handle

If the handle of a sliding door is loose, it can be quite frustrating and make it difficult for people to open the door. This problem is usually caused by an improperly aligned locking mechanism, which can be corrected by loosening the screws that hold it in place and then tightening them until they are snug against the jamb of the door.

A loose handle may result from the handle becoming detached from the spindle which connects it to the interior or handles on the outside. This usually happens as a result of a variety of factors, including excessive use, wear and tear, or just general ageing. If the problem isn't resolved quickly, the handle may be loosened and fall off.

The best method to solve this problem is by first finding the screws that connect the handles' exterior and interior. These screws are usually hidden behind tabs of plastic that can be removed using a flathead (or a Phillips head screwdriver in some instances) screwdriver. Securely store these screws to ensure they don't get lost.

Once the old handles have been removed, the next step is to remove the loose spindle. This can be done by tapping the spindle using a mallet or hammer until it comes loose from its place inside the door. The new handle is then fitted by placing the spindle in the handle hole inside and the other end into the exterior handle hole. Once the handle is installed, tighten it by screwing back the screws, and then check to ensure that the lock and unlock mechanism is working correctly.

Unusual Weatherstripping

A cracked or worn weatherstripping may let water and air get through your patio doors, which can compromise the comfort and energy efficiency of your home. It could let in moisture and create drafts that will increase your heating and cooling costs. It's simple to replace defective weatherstripping, even without the assistance of a professional. First, you must take off the old stripping by either loosing its staples with a screwdriver or prying it gently with a putty knife and then lifting it off the door. Then, you can clean the area and apply a layer of weatherstripping that is secured with an adhesive. This will prevent leaks and improve comfort.

If your sliding patio doors are no working as they should, it's essential to fix the issue as soon as possible to prevent further damage and keep them functional for years to come. Depending on how serious the problem is and the severity of the issue, a DIY solution or a professional repair/replacement might be the best option.

The most common issues with sliding patio doors are dirty rollers due to debris in the tracks, misaligned wheels and a loose handle. In most instances, these issues can be resolved by regular maintenance and cleaning, including fluidizing the track and rollers, as well as adjusting them and tightening hardware. If these solutions do not work, you should seek professional advice in order to ensure that your patio is functioning just as it should. Review the warranty information before you decide to replace or repair patio doors your patio door. This will save you money in the future for repairs and replacements.