Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very dangerous and potentially fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the old frame very easily. However when you have double pane windows that are anchored by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor, where they could be trampled.

It's a good idea to cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your property until a professional is able to repair the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window repair near me, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may be affected by a variety of issues such as sliding. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. The majority of the time it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to note that if the leakage originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it blows open with an ease. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. It is an easy procedure, but it is simpler if you have someone to help hold the frame up.

Verify that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to inadequate installation at the factory. Sending us a photo via our website will often resolve the problem. We are happy to provide suggestions.

Regular lubrication of hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become unbalanced due to wear, which can cause an opening between the frame and sash. This can be easily repaired by giving them a thorough clean, however when they're beyond repair, it may be necessary to have them realigned or replaced. Second, the interlock can be disaligned. It is located on the hinge side and could require to be cleaned. In some instances, it may be necessary to replace them.

The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce the risk of draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder, these are usually fabric tubes which are filled with a sort of filler and can be positioned on top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs windows made of upvc will provide excellent security and insulation for your home. However, it is important to realize that windows last for a certain period of time and they may reach a point where it is more efficient to replace them than repair them. If you have any problems with your Upvc window you should consult a professional as soon as you can.